Archways & Ceilings UCK Installationsanleitung PDF herunterladen (Seite 10)

in a remodel

with TOP and

bottom REVEAL

With existing drywall

At each corner of the room, measure and mark the wall down for the ceiling 11 ¼” plus

the thickness of your top reveal (example below). Measure and mark the ceiling out

from the wall 11 ¼” plus the thickness of your bottom reveal. Example: If you want a

1 ½” top reveal and a 3” bottom reveal, you would measure and mark the wall down

from the ceiling 12 ¾” (11 ¼” + 1 ½” = 12 ¾”) and measure and mark the ceiling out

from the wall 14 ¼” (11 ¼” + 3” = 14 ¼”).

Using your chalk line, snap a line at the marks on the wall and along the ceiling

around the entire perimeter of the room.

Using a staple gun w/ 1” (or greater) staples/brads (PROs) or Screw Gun w/ 1” (or

greater) deck screws (DIYers), attach a cove piece butted to each side of each corner

(either touching the top of an inside corner or the bottom of an outside corner).

Measure, mark and then attach all other cove pieces in between the butted cove

pieces on each corner no more than 16” O.C.

Helpful Tip: For help spacing your cove pieces evenly between each corner,

visit www.archkit.com/cove-spacing to watch our “How-To” video and see the

mathematical formula.

10.

Using a staple gun w/ 1” (or greater) staples/brads (PROs) or screw gun w/ 1”

(or greater) deck screws (DIYers), install your 90° inside and/or outside corners

(right angle) to align to your top and bottom ledgers.

Where the joist/trusses run perpendicular to your top ledger, line up the sides of your top

ledger to the snap line on your ceiling and use a nail gun w/ 16d nails (PROs) or screw

gun w/ 3” (or greater) deck screws to fasten the top ledger securely through the drywall

and into the joists/trusses.

Where you do NOT have joist/trusses, use 1/8” x 3” Steel Mushroom-Head Toggle Bolts with

1/8” x 1” washers to securely fasten your top ledger to your existing drywall ceiling (or any hardware capable of fastening a 2x4 to drywall).

Video: For more clarication, visit www.archkit.com/toggle-bolts to watch our “How-To” video which shows you how to securely

fasten your top ledger to your drywall ceiling using toggle bolts.

Since you will need to fasten the bottom ledger securely to your wall, use a stud nder

to locate your studs.

Line up the sides of your bottom ledger to the snap line on your wall and use

a nail gun w/ 16d nails (PROs) or screw gun w/ 3” (or greater) deck screws to

fasten the bottom ledger securely through the drywall into your studs around

the entire perimeter of the room.

The 6 90° corners are reversible to t both inside and outside

corners. If you have an inside 90° corner, then the top halves

will are outward like the etchings of an arrow. If you have

an outside 90° corner, then the top halves will come to a point

like the head of an arrow.

inside corner

outside corner

Since you’ll need to fasten the top ledger securely to your ceiling, use a stud nder

(or check in the attic if you have access) to determine if there are joists/trusses in the

position and orientation where you’ll need to securely fasten the top ledger.

More than likely, you’ll probably have two parallel walls where you’ll NOT

have joists/trusses to securely fasten your top ledger. In these cases, use

1/8” x 3” Steel Mushroom-Head Toggle Bolts with 1/8” x 1” washers to securely

fasten your top ledger to your drywall ceiling (or any hardware capable of

fastening

a 2x4 to drywall).

Video: For more clarication, visit www.archkit.com/top-reveal to watch our

“How-To” video which shows you how to eectively locate your joists/trusses.

If applicable, install your 45° inside corners by using 4 of the 40 cove pieces that have

already been modied to be used as a cove piece as well as 45° inside corner.

10.

If you have a 45° outside corner,

a template on the side panel

of the box has been provided.

Trace your 45° outside corner on

to a piece of ½” plywood/OSB,

cut it out and then install.

17 18

1 2 ... 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Archways & Ceilings UCK Installationsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Archways & Ceilings UCK